Brand New 40W Laser Tube Water Cooling for The CO2 Laser Engraver

Industrial Laser Solution, 2, 000 Hours Service Life
Its maximum power can reach 50W.
Maximum 2, 000 Hours Life Span
2" x 39.4" L (50mm x 1000mm L)
Good mode, high power, cost effective, suitable for advertising industry and other high precision engraving and simple cutting applications

We will send a new one freely if the tube is broken during transit.
Once received the laser tube, please check again the first time. We need the damaged record from the courier as the proof before we send the new one free.

Suitable Machines Model
LEM-R60, LEM-R100, LEM-R80, LEM-LD-600H, LEM-LD-900H;
Other machines with 40W laser tube

Instruction:
Using conditions of laser tube
1. Ambient temperature: 10 - 40
2. Relative humidity: 45% - 85%
Cooling conditions
1. Cooling water temperature: 15 - 30 in summer, in other seasons 20 is better.
2. Cooling water flow rate: Above 6L / min;
3. Water quality: Drinking water and impurities is less than 0.2mm in diameter;
4. Cooling water PH value: 6 -9.
Terms & Condition of Purchase: After we receive PO from customer with stamp, we give PI for customer.
Lead Time: After receiving customer's deposit, within 1-3 days.
Wooden Box: There is total one wooden box.
Tube Size
2" x 39.4" L (50mm x 1000mm L)
Tube Weight
4.4lb (2kg)
Package
Fumigation free package
Packing Size
Single pack tube size: 51.2" x 11.8" x 11.8" (1300mm x 300mm x 300mm)
Gross Weight
Single pack tube: 42lb (20kg)